|
Last Modified: 11-29-2007 |
1.6 A |
|
Service Category: Vehicle Interior |
Section: Seat |
|
Model Year: 2008 |
Model: Sequoia |
Doc ID: RM000002XEP002X |
|
Title: SEAT: POWER SEAT SWITCH (for Front Seat): REMOVAL (2008 Sequoia) |
REMOVAL
HINT:
-
Use the same procedure for the LH side and RH side.
-
The procedure listed below is for the LH side.
1. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the front seat
.
2. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the front seat
.
3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)
4. REMOVE RECLINING POWER SEAT SWITCH KNOB (for Power Seat)
5. REMOVE VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat)
6. REMOVE VERTICAL ADJUSTING HANDLE LH (for Manual Seat)
7. REMOVE VERTICAL SEAT ADJUSTER KNOB (for Manual Seat)
8. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)
9. REMOVE FRONT SEAT CUSHION SHIELD LH (for Power Seat)
10. REMOVE FRONT SEAT CUSHION SHIELD LH (for Manual Seat)
11. REMOVE FRONT POWER SEAT LUMBAR SWITCH (for Power Seat)
|
(a) Remove the 2 screws and front power seat lumbar switch.
|
12. REMOVE FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat)
|
(a) Remove the 2 screws and front power seat lumbar switch.
|
13. REMOVE LEG SUPPORT ADJUSTMENT SWITCH (w/ Leg Support Adjustment Switch)
|
(a) Disengage the 2 wire harness clamps and remove the 2 screws and leg support adjustment switch.
|
14. REMOVE FRONT POWER SEAT SWITCH LH (w/o Memory)
|
(a) Disconnect the front power seat switch connector.
|
(b) Remove the 3 screws and front power seat switch.
|